Vend pos barcode scanner

Setting up your 7Qi/7Ci Socket Mobile Scanner for iPad

To set up your Socket Mobile scanner for iPad follow the steps below:

Note: This is a Bluetooth scanner so it will connect wirelessly to the iPad.

1. Press and hold the small power button until the LED turns blue, and it beeps twice (it will beep low and then high).

2. Your Socket barcode scanner is now powered on. For use with the iPad, you'll want to set the scanner to iOS mode.

The scanner will automatically add your Vend products to a sale if iOS mode is running. Tapping other fields during iOS mode will open the on-screen keyboard.

To enable iOS mode, print this page and scan the below barcode. The scanner will beep 3 times to confirm the mode change.

Tip: Try scanning the following barcodes directly on the screen, if it does not work, print off this page and scan it from there. These barcodes will also be in the manual that came with your socket mobile scanner.

3. Next, head to your iPad and tap the 'Settings' icon to open the Settings App. Tap the 'Bluetooth' menu to open the Bluetooth settings.

4. Turn Bluetooth on. Your iPad will search for available devices to connect with. Once it locates the barcode scanner, Socket CHS, tap it to connect.

Your scanner should now be all set up and ready to go. To test that it is working correctly, open the Vend Register app and scan a product barcode that has already been added in Vend. Scanning one of these products should automatically add it to your sell screen.

Having trouble connecting your scanner?

If the scanner is appearing in the Bluetooth list on your iPad but not connecting, tap the 'i' icon and choose 'Forget This Device'. Next, hold down the two top buttons on the scanner until you hear 3 descending tones. You've now successfully unpaired the scanner. Try to pair it again using the above steps.